STEIN TEC®
DRAIN CONCRETE DBT 08

This product, developed by STEIN TEC®, excludes the disadvantages of conventional drain concrete layers according to FGSV Merkblatt für Dränbetonschichten (DBT) Nr. 827 (=FGSV bulletin about drain concrete layers Nr. 827).

The shrinking properties and the strength development of STEIN TEC® Drain Concrete DBT 08 are optimally adapted to STEIN TEC® bedding and jointing mortars and it is possible to pave on it after 24 hours already. The complete system, including STEIN TEC® bedding and jointing mortar, is reinforced in that way, that also traffic loads up to construction classification “SV” according to RStO 01 (=heavy traffic) can be borne. At professional processing an evenly high adhesive bond is achieved with STEIN TEC® bedding mortars.

Dränbeton DBT 08

STEIN TEC®
BEDDING MORTAR BM 04

Bedding Mortar BM 04 is a work dry mortar (available in the silo in mixing technique or as bag ware) for pavements and slabbed surfaces, which can always be optimally processed freshly. Therefore, problems like over-storing / demixing or time lag belong to the past. Its ultimate strength of >30 N/mm² is achieved reliably and without variations in quality at professional processing. It features the required water permeability for surfaces by bonded element construction. For slabbed surfaces as well as for paving blocks with a smooth and even underneath we additionally recommend to utilise STEIN TEC® Bond Adhesive “Haftfix”.

Bettungsmörtel BM 04

STEIN TEC®
BEDDING MORTAR BM 04 S

Bedding Mortar BM 04 S is a work dry mortar (available in the silo in mixing technique or as bag ware) with a very fast setting and hardening rate. It is suitable for heavily used surface pavements that need to be used at an early stage. It surpasses the normal-setting Bedding Mortar BM 04. Its ultimate strength of >35 N/mm² in the bedding is achieved reliably and without variations in quality at professional processing. It features the required water permeability for surfaces by bonded element construction. For slabbed surfaces as well as for paving blocks with a smooth and even underneath we additionally recommend to utilise STEIN TEC® Bond Adhesive “Haftfix”.

Bettungsmörtel BM 04 S

STEIN TEC®
BOND ADHESIVE HAFTFIX

Haftfix is a hydraulically setting, polymer-modified adhesive bonding mortar. It is designed to achieve a high adhesive bond of slabbed surfaces and, in general, for element surfaces with high force requirements. The processing is carried out immediately before the laying in bedding mortar by dipping the clean slab underneath or the contact surface (Fresh-in-Fresh). The adhesive tensile strength of the composite zone is increased multiplicatively by that. For concrete paving blocks, slabs and, in general, for smooth and even (e.g sawn) element underneaths, STEIN TEC® Bond Adhesive Haftfix should be applied additionally.

Haftkleber Haftfix

STEIN TEC®
JOINTING MORTAR HD 02 - 1K

The most established product of our mortar range is HD 02 – 1 K, a highly resilient jointing mortar which is easy to process. For all types of application and, especially, for high traffic forces it is being used free of failure for many years now. Jointing Mortar HD 02 – 1 K is available in three standard colours: light grey, medium grey and dark grey.

On demand, further, technically feasible colours can be produced (2,4 t minimum purchase).

Fugenmörtel HD 02 - 1K

STEIN TEC®
JOINTING MORTAR HD 02 S - 1K

Jointing Mortar HD 02  S – 1K is suitable for all cases, that require a quicker strength development. HD 02 S – 1K is especially suited for the application during the cold season. Jointing Mortar HD 02 S – 1K is available in three standard colours: light grey, medium grey and dark grey.

On demand, further, technically feasible colours can be produced (2,4 t minimum purchase).

Fugenmörtel HD 02 S - 1K

STEIN TEC®
JOINT REPAIR MORTAR SF 02 - 1K

Joint Repair Mortar SF 02 – 1K is characterised by very quick setting/hardening and very high mechanical values. Hence, SF 02 – 1K makes a very soon loading possible after a joint repair of surfaces with an intact bedding. Joint Repair Mortar SF 02 – 1K is available in three standard colours: light grey, medium grey and dark grey.

On demand, further, technically feasible colours can be produced (2,4 t minimum purchase).

Fugenreparaturmörtel SF 02 - 1K